Stainless Steel top with Electronic speed Regulator. The stirrer unit is housed in robust fabricated sheet metal housing designed for easy and vibration free operation. Ventilation lowers are provided for internal cooling. Both the rotating magnetic field from a balanced permanent Magnet to induce variable speed stirring action in closed or open laboratory Glass one non-magnetic field from a balanced permanent magnet to reduce variable speed stirring action in closed or open laboratory glass one non-magnetic vessels. Stirring is accomplished by means of a small paddle placed in the liquid to be stirred. The stirrer speed can be varied up to 1200 RPM. Provided with one Teflon coated (PTFE) magnetized stirring BAR Working on 230 volts 50 Cycles. The improved hot plate magnetic stirrer is equipped with hot plate with a heated capacity, which ensures uniform heating on the surface. The hot plate heating is controlled by an Energy Regulator which regulates the heating at any percentage of the total heater .The stirrer unit is thermally insulated from the hot plate by asbestos cement Buffer surface.

The working theory of this product is using micro electrical machinery to drive the heatproof magnet to spin thus creating a magnetic field. This magnetic field will drive the stir bar spin in the container to cause spin of the solvent. Meanwhile, it can heat the solvent so that it can be fully mixed at set temperature. Widely applied in biology, medicine, chemistry, chemical engineering and other related fields. Constantly adjustable stirring speed and heating temperature. Heating plate is made out of aluminum alloy and coated with Teflon to provide all of excellent heat conductivity, heat/cold proof and corrosion resistance. Double heat insulation design is applied in the bottom of the heating plate to improve the heating efficiency and can avoid the heat transmitting to the case. Speed:100 to 1700rpm. Maximum stirring capacity:10L. Temperature control: room temperature to 199°C. Highest temperature: 300°C. Circular designed aluminum stirrer. Epoxy-coated metal case housing, 3-1/2" x 5-3/8". Operating Voltage - 110 V. The stirrer is variable speed ( 80 to 1500 rpm ).
Comes complete with 9mm x 25mm PTFE coated stir bar.