Neodymium magnets (NdFeB) are known as Rare Earth magnets, which are alloys of the Lanthanide group of elements. Neodymium magnets are the most advanced permanent magnet materials at present. NdFeB magnets are available in a number of different grades that span a wide range of properties and applications. For instance, from N35 to N50, 33M to 45M, 35H to 48H, and SH, EH UH series. Our magnets can be widely used in all kinds of electromotors, separators, loudhailers, computers, elevators, cellphones, VCDs and maglev. NdFeB magnets are brittle (though not as brittle as the SmCo magnets), and machining operations should be performed prior to magnetization, using diamond tools. We are well equipped to manufacture these materials to customers' specifications. Vicalloy Magnets (MVC Magnets). Fe-Cr-Co Semi-hard Magnets (KM Magnets). Temperature Compensated Magnets (Thermalloy). Permendur. The maximum Energy product (BH)Max for isotropic injection ferrite is up to 6.0 KJ/m^3 while for anisotropic 13.0KJ/m^3. Injection magnets are mainly used on micro motors and sensors.

In bonded Hard Ferrtie material range, flexible rubber magnet is mostly common used. Flexible materials can be bent, coiled, twisted, punched, and otherwise machined. into almost any shape without loss of magnetic energy. They perform well in a wide variety of simple applications for home, school, shop and office. The flexibility and machinability of these materials permit design innovations and automated manufacturing techniques not possible with rigid or brittle materials. Flexible materials offer the product designer a uniquely desirable combination of properties at lower cost than other magnet materials. Flexible magnets are the least expensive by volume and most pliable permanent magnet material when compared to ceramic (), alnico or rare earth magnets. They are lightweight, easy to print on and easy to cut with scissors, flat, knife or die. Also, they are ideal for advertising specialties and lightweight holding applications. We are committed to doing our best for you, and welcome inquiries for Flexible Rubber Magnets. Closer tolerances on critical dimensions can be negotiated Injection molded hard ferrite magnets can be manufactured with either isotropic or anisotropic material.