1-1/8'' standard gap. Screw mount or adhesive mount. UL; ULC and CE listed. Screw terminals eliminate wire splicing and soldering. White. Automatically detects and intruder when contact is broken. Small and neat surface mounting. Built in tamper protection. This Magnetic Contact Detector can be easily added to your existing wired alarm system . Magnetic Contacts are ideal for protecting, doors, windows and patio doors (in fact, any opening device, drawer or cupboard for example) and activate the response alarm in the event of a break-in. Ideal for use in situations that are not suitable for PIR detectors. Super-Mini Surface Mounting Magnetic Contact. Installs using either self adhesive or screw mount. Unit ships with mounting screws and self-stick strips. Flange Snaps off to allow for an even smaller adhesive mount switch. Includes 5 foot zip cord leads standard or with 18" wire leads. Uses a standard gap of 1/2" (12mm). Adhesive pads are pre-applied for fast and convenient installment. It is not necessary to remove these for screw mounting. Entry delay time options - 15 second, 1 min 15 seconds & 3 min 15 seconds.

Programmed from VISTA keypad or learn mode. Epoxy sealed for protection from moisture and impact. 1-1/4'' standard gap. Compatible with control panels with serial number device capabilities for multiplex polling loop. Programmable surface-mount contact. Wireless Magnetic Contact Transmitter - MCT-302 N S is a fully supervised wireless magnetic contact transmitter designed primarily for protecting doors and windows using a built-in magnetic contact that operates in conjunction with a magnet to detect the opening and closure of a door or window. An auxiliary hardwired input for additional security sensors, Periodic supervision message transmitted automatically. Fully supervised. Auxiliary hardwire input. Anti-collision signal protection. 4-channel - switch selectable. Long-life lithium battery. Standard gap: 1-1/4" (32mm). Spacers, covers and screws included. Switch Type: Form A (SPST) Reed. Contact Rating: 300ma @ 30VDC. Visual magnetic alignment mode, eliminates templates. Improved sweeping siren over 95 db. Long-life 9V batter powered (supplied); Low battery alert. New designer look.