Dual Film Nylon Coated
NEMA-MW-80
155 Degrees C
Class SPN
Spooled
MAGNET WIRE SOLID COPPER SPN, NEMA-MW-80 155C This magnet wire is copper core with a dual film of polyamide(Nylon) insulation. Magnet wire is insulated for the winding of electromagnets and for coils for transformers and other electrical applications .
Soft copper solid round conductorInsulationInsulation base coat: modified polyester resin. Overcoat: modified amide imide resin.ColorAmber (typical)Thermal Class200°C
ApplicationsHigh speed winding processes for: Open motors, airtight motors, automotive coils. Manufacturing of compact coils for applications where additional copper is required in stator and rotor grooves. PropertiesExcellent thermal stability, excellent dielectric and mechanical properties.
Very good chemical resistance to common solvent and coolants. Better sliding during coil insertion in slots (reduced friction factor). High resistance to abrasion.

Class 220 modified polyester polyamideimide composite enameled round aluminum wire with diameter range of 0.3 - 2.3mm and bare aluminum wire with diameter range of 1.4 - 4.5mm. The products meet the standard of NEMA, IEC and GB. We can also establish internal control standard according to customers' technical requirements to arrange our production. Our products can be widely used in transformer of microwave oven, transformer of 3-phase power, rectifier, motor of kitchen electrical appliances, equipment for magnetically selecting minerals, spare part of automobile, wire and cable.
AWG: 42-8
Standard: GB6109.10-90, IEC60317-22, NEMA MW76-C
Consists of one enameled wire covered in nylon/polyester-imide
Low surface friction coefficient for excellent bending
Suitable for air conditioner motors and other high-speed winding applications