Used to attach all Turbelle pumps and Comline components.
This patented holding device has a very high holding power and can be used to attach all other TUNZE devices to the aquarium pane, provided the sliding unit of the standard clamp-type holder is used.
The Magnet Holder consists of a two-part magnetic shaped part. The inside unit is placed in the water and the external unit is attached to the outside of the aquarium; both parts are identical in shape.
Within a short period of time, the inside unit with the sliding unit for the pump or the Comline components can be positioned on the inside glass pane. Subsequently, the external unit has to be attached to the same position on the glass pane from the outside.
Due to the encapsulated construction, it is resistant to corrosion and causes no harmful effects to the aquarium biotope.
Dimensions: 112L x 15W x 103H mm
For aquariums with a glass thickness of up to 12 mm (0.47 inches).

The Magnet Holder consists of a two-part magnetic shaped part. The inside unit is placed in the water and the external unit is attached to the outside of the aquarium; both parts are identical in shape. Within a short period of time, the inside unit with the sliding unit for the pump or the Comline components can be positioned on the inside glass pane. Subsequently, the external unit has to be attached to the same position on the glass pane from the outside. On account of their encapsulated construction, the Magnet Holder is resistant to corrosion, and causes no harmful effects for the aquarium biotope.Magnetic holder for all Turbelle pumps and Comline. The magnetic holder permits uncomplicated mounting of compo-nents at any position on the aquarium pane; encapsulated construction; requires seconds only for attachment; two models for glass thickness of up to 12 mm (.47 in.) and up to 19 mm (.74 in.).