Use the LM Series Lifting Magnet to move plate steel, block or round steel, and iron material in your shop. Super-powerful lifting magnet requires no electricity. It's perfect for loading or unloading most workpiece including press molds, plastic molds, machined parts, etc. Rated for up to 3000kg!
Powerful magnet tested to hold OVER THREE TIMES the rated load for maximum safety
Rated for loads up to 3000kgs, if required can up to 6000kgs.
Eliminates dangerous straps and slings
Fast, safe, efficient loading and unloading
On all our lifting magnets there is a built-in safety factor of 3.3 times the rated load. This means that the safety factor is 3.3 times the maximum rated load for each magnet.
Permanent lifting magnets create a strong but, relative to electromagnets, low magnetic field. Therefore they are rather sensitive to air gaps. This means when the air gap between load and lifter increases, the magnetic force will decrease considerably.

Powered 12V battery which gives at least 8 hours of operation
Hand-held, Infra red remote allows the operator to control the lifting magnet from up to 4.5 metres away
High degree of safety
Bail sensor prevents magnet de-energization while the load is being lifted
Dual push buttons must be pressed similtaneously for load release
Visual and audible alarms signify when battery is running low of charge
The magnet will not allow to be turned on is the charge is not sufficient to lift a load
Exhaustive lifting guidelines ensure a double lift capacity with respect to weight of load
This model is specially designed for plate lifting from 3 mm thickness and up. Provided a smooth and flat surface, this magnet will lift a plate of 2400x1800 mm of 3 mm thick and even 6x3 metres when 25 mm thick! The "tip-off" feature allows to drop excess plates in case multiple plates are picked up from a stack.